Back to Index

ETECH-200: Cooperative Education (____) (1-6 hour)

A cooperative college-industry, college-business, or college-government work experience. The student is interviewed and employed by an industrial, business or government organization, then a work program is outlined. Supervision of the work experience is conducted by the employer and the college coordinator. May be repeated if subject matter is different. Written permission of department chairperson required. Offered on a Pass-Fail basis only.



ETECH-206: Seminar in Technology (____) (0.5 hour)

Lectures and written reports on current topic in technology. May be repeated for a maximum of 2 hours. Written permission of instructor required. Offered on Pass/Fail basis only.



ETECH-227: Workshop (___) (1/2 - 5 hour)

Specialized instruction offered as a short-term workshop. May be repeated when the title is different. Neither course nor credit hours can be counted toward a degree, but may be utilized in creation of a credential certificate. May be graded as pass/fail or letter grade.



ETECH-228: Workshop (___) (1/2 - 5 hour)

Specialized instruction offered as a short-term workshop. May be repeated when the title is different. Neither course nor credit hours can be counted toward a degree, but may be utilized in creation of a credential certificate. May be graded as pass/fail or letter grade.



ETECH-296: Materials in Industry (3 hours)

Physical properties, structure and applications of materials used in manufacturing.



ETECH-300: Cooperative Education (____) (3-6 hours)

A cooperative college-industry, college-business or college-government work experience. The student is interviewed and employed by an industrial, business, or government organization, then a work program is outlined. Supervision of the work experience is conducted by the employer and the college coordinator. May be repeated if subject matter is different. Written permission of department chairperson is required. Offered on a Pass/Fail basis only.



ETECH-400: Cooperative Education (____) (3-6 hours)

A cooperative college-industry, college-business or college-government work experience. The student is interviewed and employed by an industrial, business, or government organization, then a work program is outlined. Supervision of the work experience is conducted by the employer and the college coordinator. May be repeated if subject matter is different. Written permission of department chairperson is required. Offered on a Pass/Fail basis only.



ETECH-401: Investigations in Technology (____) (1-4 hour)

Special studies in technology to provide for the individual requirements of the student desiring supplemental work in the student's field of special interest. Prerequisite: Written permission of department chairperson. May be repeated if subject matter is different.



ETECH-502: Engineering Economy (3 hours)

(3 hours lecture). Analysis of engineering proposals utilizing time value of money and related factors. Includes depreciation and after-tax consequences, feasibility and optimum life comparisons. Additional topics are manufacturing cost studies, estimating, sources of costs, allocation of costs and justifications.



ETECH-539: Workshop (___) (1/2 - 5 hour)

Specialized instruction offered as a short-term workshop. May be repeated when the title is different. Neither course nor credit hours can be counted toward a degree, but may be utilized in creation of a credential certificate. May be graded as pass/fail or letter grade.



ETECH-589: Workshop (___) (1/2 - 5 hour)

Specialized instruction offered as a short-term workshop. May be repeated when the title is different. Neither course nor credit hours can be counted toward a degree, but may be utilized in creation of a credential certificate. May be graded as pass/fail or letter grade.



ETECH-603: Senior Honors Project 1 (3 hours)

The Senior Honors Project is an optional way to earn Departmental Academic Honors for students who are members of the Honors College. The course is a two semester sequence where the student undertakes a year-long research project or creative endeavor under the guidance of a faculty member to expand their knowledge in an area integral to their academic growth and development. The Senior Honors Project 1 is the first course in the sequence and will focus on the fundamental development of the project and preliminary scope of work to be completed. Students will receive a grade of A, B, IP (in progress) or NC (no credit) for each enrollment of the Senior Honors Project. A grade of NC voids the process and the student must then complete their Departmental Academic Honors in the traditional way.



ETECH-604: Senior Honors Project 2 (3 hours)

The Senior Honors Project is an optional way to earn Departmental Academic Honors for students who are members of the Honors College. The course is a two semester sequence where the student undertakes a year-long research project or creative endeavor under the guidance of a faculty member to expand their knowledge in an area integral to their academic growth and development. The Senior Honors Project 2 is the culmination of the project started in Senior Honors Project 1 and will result in a public presentation of the work. Students must earn a grade of A or B to receive credit for this course. Failure to complete the course with a grade of A or B will void this option and students will have to satisfy their Departmental Academic Honors requirement in the traditional way. There will be no IP (in progress) or IN (incomplete) grades for this course. Projects must be done by the end of the spring term to count towards Departmental Academic Honors requirements. Prerequisite: Senior Honors Project 1.



ETECH-670: Professional Certification Seminar (1 hour)

Preparation for professional certification in various industries. Registration for, and participation, in either an SME sponsored certification as required by the instructor or the NCEES Fundamentals of Engineering (FE) examination is required during the semester of enrollment. This course will be offered as Pass/Fail only. Prerequisite: Senior standing. Permission of instructor is required.



ETECH-694: Engineering Technology Laboratory Internship (____) (1-4 hour)

Variable credit for one to four hours. Can be repeated. Junior/Senior engineering technology students can enroll for the course in their technical area as laboratory assistants during the semester a specific laboratory is offered. Prerequisites: Junior/Senior standing and written permission of instructor.



ETECH-795: Special Topics in Engineering Technology (____) (1-3 hour)

Selected topics in engineering technology. Regularly scheduled classroom and laboratory study pertaining to a distinct body of technical knowledge. May be repeated if subject matter is different. Written permission of department chairperson required.



ETECH-804: Quality: Management and Control (3 hours)

(3 hours lecture). The use of management "tools" to help with quality issues. Including: Total Quality Management (TQM), Benchmarking, ISO 9000-14000, Lean Manufacturing, Six Sigma, Design of Experiments (DOE), Failure Mode and Effect Analysis and Statistical Process Control.



ETECH-805: Current Issues in Engineering Technology (3 hours)

Study of specific activities/topics/trends impacting the various engineering technology disciplines. Case studies and current innovation emphasis. May be repeated.



ETECH-807: Systems Engineering and Analysis (3 hours)

A systems approach to product/project design. System design process from needs identification through conceptual and detail design, product/project development, systems testing and evaluation. Operational and economic feasibility, reliability, maintainability, supportability. Consideration of various project/product design aspects (mechanical, thermal, electrical/electronic, aesthetic, safety, etc.).



ETECH-809: Engineering Project Management (3 hours)

The design and control of technologically based projects. Considering theoretical and practical aspects of systems models, organizational development, project planning and control, resource allocation, team development, quantitative and qualitative decision making, financial and legal issues.



ETECH-810: Collaborative Projects for Engineering Technology (3 hours)

Multidisciplinary capstone course incorporating aspects of design, project/product management, value engineering, quality control, current technologies and specific engineering/technology techniques to develop/design/improve products or processes. Collaboration of multidisciplinary backgrounds to address technical issues of varying duration and magnitude. Prerequisite: Should be taken as one of the last graduate courses in program. Permission of instructor.



ETECH-831: Value Engineering (3 hours)

(3 hours lecture). Value engineering concepts, function analysis system techniques (FAST) diagramming, creativity, matrix evaluation, design-to-cost, life cycle costing, human relations and strategies for organizing, performing and implementing value engineering work.



ETECH-852: Integrated Design and Manufacturing Concepts (3 hours)

Product design and manufacturing from concept to completed project including automated design and manufacturing, solid modeling for design and analysis, prototype and mold development, and material selection, with a strong emphasis on certification of students in industry relevant design software.



ETECH-888: Design of Experiments (3 hours)

Inferential statistics, DOE Language and Concepts, Experimentation using One-Way and Multi-Way Classifications using ANOVA, Linear Regression, Two-Level Factorial Experiments and Fractional Factorial Experiments. Software applications.



ETECH-890: Research and Thesis (3-6 hours)

Development of a thesis under Option 1. Prerequisite: TTED 891 Methods of Research. May be repeated for a maximum of six hours. May be taken as graded or pass-fail.



ETECH-895: Advanced Topics in Engineering Technology (1-6 hour)

Selected topics in engineering technology. Study pertains to a distinct body of technical knowledge. May be repeated if subject matter is different. Research paper and presentation to ETECH Graduate Committee required. Prerequisite: Written permission of the instructor required.



ETECH-899: Quantitative Decision Making in Industry (3 hours)

Methods of utilizing quantitative techniques in production planning, manufacturing engineering, quality control and product marketing for modern industry.


Back to Index

 

 
AllofE Solutions